After months of wrestling with stubborn soap scum and mildew in my bathtub, I knew there had to be a better solution than endless scrubbing.
I love experimenting with cleaning products, I made it my mission to find the best bathtub cleaner without scrubbing that required minimal effort.
Over several weeks, I tested over a dozen products until I finally discovered the top 10 bathtub cleaners that dissolve grime and leave my tub sparkling clean with hardly any scrubbing.
With my hard-earned expertise, I’m excited to share my picks for the most powerful and effective cleaner for bathtub stains that cut through gunk and grime without making you work too hard.
Keep reading for my tips and reviews!
Best Bathtub Cleaners Without Scrubbing To Buy
RMR-86 Instant Mold and Mildew Stain
Wet & Forget Shower Cleaner
RMR-86 Instant Mold
Bioclean Hard Water Stain Remover
RMR – Tub and Tile Cleaner
BETTER LIFE Bathroom Cleaner
Lysol Power Foaming Cleaning
GP66 Green Miracle Cleaner
RMR-86 Instant Mold and Mildew – Scrub Free Formula
This scrub-free formula promises to target the ugly stains left behind by mold and mildew, eliminating the need for tiresome scrubbing and elbow grease. After using RMR-86 for several weeks on my bathtub, I can confirm that it lives up to its claims.
This fast-acting spray is incredibly easy to use – simply spray it directly onto any affected area, no need to dilute. I focused on applying it to the stubborn mildew stains that lingered around my tub’s drain and jets. The light citrus scent is pleasant, not overpowering or chemical-smelling.
Within seconds of spraying, I watched in amazement as the stains began disappearing right before my eyes! The formula works quickly to break down and dissolve the grimy buildup caused by mold and mildew. After letting it sit for 5 minutes, I was able to just wipe the stains away with a clean cloth – no hard scrubbing necessary.
What I especially appreciate about RMR-86 is that it’s safe for use on many different surfaces prone to mildew, including tile, grout, sealed granite, glass, chrome, fiberglass, porcelain, laminate, and more. It can also be used outdoors on siding, concrete, painted wood, and other areas plagued by mold.
After continued use, my bathtub now looks brighter and cleaner than ever before. I’m also glad to know I can safely rely on RMR-86 to tackle mold and mildew stains throughout my entire home, garage, basement, or patio areas. It saves so much time and energy compared to scrubbing.
For anyone seeking a powerful mold and mildew stain remover that actually lives up to its claims, I highly recommend giving RMR-86 Instant Mold and Mildew Remover a try. It’s an effortless way to destroy ugly stains and prevent mold/mildew growth without making you work too hard. This fast-acting spray is a game-changer for simplifying bathroom and household cleaning.
Wet & Forget Shower Cleaner Requires No Scrubbing
So when I heard about Wet & Forget Shower Cleaner, a no-scrub formula that keeps showers sparkling clean, I was intrigued. After testing it for several weeks, I’m happy to report it lives up to its promises.
What I love most about Wet & Forget is the sheer convenience. Just spray it on the affected areas of your shower once a week, let it sit for 8-12 hours, then rinse clean. No tedious scrubbing or elbow grease is required! I focus my spraying on soap scum build-up on walls and glass, mildew stains around the drain and jets, and mineral deposits along the tub. The light, pleasant vanilla scent beats harsh chemical fumes.
After letting it dwell overnight, Wet & Forget goes to work dissolving all the grimy buildup in my shower. All I have to do is rinse with warm water and I’m amazed by how clean everything looks. The formula is powerful enough to tackle mold, mildew, hard water stains, and everyday dirt and oils. Continued weekly use also helps prevent future soap scum.
I feel good knowing Wet & Forget is safe for most shower surfaces. During testing, I used it in my fiberglass tub and tile walls with no issues. It’s also suitable for porcelain, glass, metal, and other non-porous materials. The bleach-free, non-toxic formula means no harsh chemicals around my family.
With regular weekly application, I’ve noticed a massive improvement in the condition of my shower. Gone are the endless cycles of scrubbing and frequent mold outbreaks. The cleaner has restored the shine to my walls and glass door. I also appreciate the cost value – one 64oz bottle provides 3 months of cleaning power.
For its ability to dissolve shower gunk without making you work too hard, Wet & Forget earns top marks in my book. The convenience of a no-scrub formula paired with its cleaning strength makes shower maintenance a breeze. If you’re seeking an effortless way to get your shower clean and keep it that way, Wet & Forget is a superb choice.
RMR-86 Instant Mold Stain and Mildew – Scrub Free Formula
After testing it in my bathroom for several weeks, I can confirm this spray delivers powerful cleaning without any tough scrubbing required. What sets RMR-86 apart is its ability to quickly penetrate and dissolve mold, mildew, and other organic stains.
All it takes is a light misting on affected areas. I focused my spraying along the bathtub caulking, shower grout lines, and tile corners prone to mildew buildup. Within seconds, I watched in amazement as those stubborn stains started disappearing.
Unlike other cleaners that just bleach or cover up stains, RMR-86 actually breaks down the grimy residue left by mold and mildew. After letting it sit for 5 minutes, I can simply wipe away the stains with a clean cloth. No need for vigorous scrubbing or repeat applications. The fresh citrus scent is also much more pleasant than harsh bleach fumes.
In addition to working wonders in my bathroom, I also appreciate that RMR-86 is versatile enough for use throughout any home. It’s safe for surfaces like wood, concrete, vinyl, and more, so it tackles mold and mildew stains anywhere – walls, basements, outdoor furniture, you name it.
After continued use of this scrub-free spray, the condition of my bathroom has greatly improved. Grout lines look brighter, caulking appears fresh and clean, and overall mildew growth has been curtailed. I’m no longer stuck in a cycle of recurring stains and tiresome scrubbing.
For its ability to power through mold and mildew stains without making you work too hard, a bottle of RMR-86 has secured a permanent spot under my sink. If you’re seeking the convenience of a no-scrub, fast-acting cleaner for bathroom and household mold problems, it doesn’t get much better than this. RMR-86 is a must-have for busy homeowners. Highly recommended!
Bioclean Hard Water Stain Remover
What makes Bioclean so effective is its heavy-duty bathtub cleaner developed to dissolve and remove years of accumulated mineral deposits. To use it, simply spray or wipe the product directly onto stained surfaces, let it sit for 5-10 minutes, then rinse clean. No need for vigorous scrubbing or repeat applications.
I focused on spraying Bioclean along the bathtub rings and shower door tracks where hard water stains had built up over time. After letting it sit briefly, I was amazed to see the solution penetrating and lifting away that tough mineral residue with minimal effort. It also made quick work of the limescale and calcium stains along my fixtures.
In addition to its strength and convenience, I appreciate that Bioclean is safe for use on most bathroom surfaces including tile, glass, porcelain, fiberglass, and chrome. The non-toxic and acid-free formula means no harsh fumes or damage concerns.
With the consistent use of this powerful scrub-free cleaner, the condition of my bathroom has greatly improved. Fixtures and surfaces now have a sparkling shine free of water spots and stains. I no longer dread cleaning days thanks to the ease and effectiveness of Bioclean.
For its industrial cleaning power that obliterates mineral buildup without hand-scrubbing, Bioclean has earned a permanent place in my cleaning toolkit. If you’re seeking an effortless solution for eliminating hard water stains, look no further. This stuff is a true game-changer for busy homeowners like me. Highly recommended!
RMR – Tub and Tile Cleaner, No-Scrub Foam Cleaner
What really makes RMR Tub cleaner stand out is its industrial-strength formula that clings to surfaces and penetrates grime in seconds. All it takes is a quick spray on affected areas. I focused on mold buildup around the tub caulking, shower grout, and tile corners. The fresh orchard scent beats the harsh fumes of other cleaners.
In as little as 15 seconds, I could see the foam going to work dissolving those stubborn stains I’d struggled with for ages. After letting it sit for a few minutes, I could simply wipe it away with a damp cloth. No hard scrubbing is necessary! The foam just powered through the soap scum, mildew, and grime that other cleaners failed to touch.
I also appreciate that RMR Tub and Tile Cleaner is safe for most bath surfaces like tile, fiberglass, porcelain, and grout. The non-damaging formula means I can use it worry-free throughout my home.
With regular use, the condition of my bathroom has greatly improved. Surfaces appear brighter, stains are kept at bay, and buildup has been reduced. Shower maintenance is finally quick and easy thanks to this hard-working no-scrub formula.
For its ability to blast through bathroom gunk without making you work too hard, RMR Tub and Tile Cleaner have earned a special spot in my cleaning arsenal. If you seek an easy yet mighty mold-fighting cleaner, look no further! This stuff ticks all the boxes. Highly recommended for busy homes.
BETTER LIFE Bathroom Cleaner
Tired of scrubbing your bathtub and showering till your arms ache? Then the Better Life Bathroom Cleaner is the perfect solution for you. This foaming spray cleaner deeply cleans without any harsh scrubbing required.
The Better Life Bathroom Cleaner comes in a convenient 32 oz spray bottle. To use it, simply spray liberally on your bathtub, shower walls, floor tiles, sink, toilet, and other bathroom surfaces. The bottle emits a strong steady foam that sticks to vertical surfaces, allowing the natural cleaning agents time to work their magic.
You’ll notice a fresh, pleasant tea tree scent as you spray. Tea tree oil is a natural disinfectant and deodorizer, leaving your bathroom smelling clean and refreshed. Once sprayed, let the foam sit for 5-10 minutes. During this time, the foaming action helps lift dirt, soap scum, hard water deposits, and mildew off the bathroom surfaces.
After letting it sit, just wipe it away with a sponge or damp cloth. The dirt and grime lift off easily, without any harsh scrubbing needed! The plant-based formula is tough on dirt, soap scum, and mildew, but gentle on eyes, skin, and noses. It does not contain any harsh chemicals, petroleum solvents, chlorine, bleach, alcohol, or synthetic fragrances.
This scrub-free cleaner is safe to use on most bathroom surfaces including tile, grout, tubs, sinks, showers, shower doors, and even vinyl shower curtains. It helps remove mold, mildew, soap scum, hard water stains, rust stains, and everyday dirt and grime. You must check out this list of the best bathtub rust removers.
While effective at cleaning and disinfecting, it does not contain any harsh ingredients that irritate the eyes or skin. The foaming action clings to vertical surfaces, allowing the natural cleaners to penetrate and lift away grime.
For best results, apply the Better Life Bathroom Cleaner and let sit for 5-10 minutes before wiping clean with a damp cloth or sponge. No tiresome scrubbing is needed! Just spray, let sit, and wipe away.
The Better Life brand focuses on providing effective earth-friendly cleaners. Their natural bathroom cleaning products help you get a clean, fresh bathroom without exposure to harsh chemicals. Give your bathroom a deep clean without irritation or hard labor using the Better Life Bathroom Cleaner foaming tub and tile spray.
Lysol Power Foaming Cleaning Spray for Bathrooms
This scrub-free foam spray has become my new go-to for quickly blasting away soap scum, grime, and germs in the bathroom without having to manually scrub!
I love how easy it is to use – simply spray the foam directly onto any dirty surface like shower walls, tub surrounds, sinks, counters, mirrors, floors, and toilets. I aim for full coverage then let it sit for 1-2 minutes. The thick foam clings well to vertical surfaces which is perfect for tackling the soap scum that builds up on my shower doors and walls.
While the foam sits, I can see it working to break down and dissolve the dirt, limescale, and soap scum. Then I just take a clean damp cloth and wipe it all away rinsing as needed. The foam does all the tough cleaning work for me, so I don’t have to spend time scrubbing and scrubbing.
What’s great is that in addition to cutting through grease and grime, this Lysol cleaner also kills off 99.9% of bacteria and viruses that lurk in the bathroom. I feel good knowing that as I clean, I’m also disinfecting surfaces and eliminating germs that make people sick. The antimicrobial action works in just 30 seconds!
I use it all over the bathroom – on the glass shower doors, ceramic tile walls, fiberglass tub and shower, granite countertops, porcelain sinks, and toilet. It’s safe for these various surfaces and always leaves them looking much cleaner and brighter.
The foam spray is so easy to control and prevents messy drips or overspray like runny cleaners. It leaves behind a nice clean scent too, not an overwhelming chemical smell. I’m able to quickly clean and disinfect the bathroom without endless scrubbing thanks to this Lysol foam spray.
Based on my experience, I highly recommend the Lysol Power Foaming Bathroom Cleaner to anyone looking for an easy, scrub-free way to clean bathroom surfaces and kill germs. The thick foam clings to surfaces while the active ingredients cut through grime and eliminate bacteria. Just spray, let sit 1-2 minutes, and wipe clean – it’s that easy!
GP66 Green Miracle Cleaner Without Scrubbing
I was skeptical when I first heard of GP66, an all-in-one cleaner that can tackle just about any mess imaginable without scrubbing. But after trying it throughout my home, I’m a total convert! This powerful green cleaner makes cleaning so much easier.
What I love most is the versatility – this one bottle of GP66 replaces the dozens of specialized cleaners I used to rely on. No more having separate products just for stainless steel, tile, glass, fabrics, etc. GP66 can clean virtually any surface all over the home, inside and out.
I’ve used it on ovens, laundry, walls, floors, carpets, patio furniture, and more. It handles the toughest grease, grime, dirt, stains, mold, you name it. The best part is there’s no endless scrubbing required. Just spray it on full strength, let it sit briefly to penetrate, then wipe or rinse clean. The cleaner does all the tough work for you.
GP66 is designed to break down the molecules of the stain and dissolve it away. It uses a water-based formula that deeply penetrates surfaces instead of just sitting on top like water alone does. This allows the active ingredients to interact with and emulsify grease, dirt, oils, etc. so they can be wiped away without stubborn scrubbing.
I love that it’s an American-made product that is NSF-certified and safe when used as directed. It has a pleasant, mild scent and is septic-safe. The reusable spray bottle makes application easy. A little bit goes a long way since it’s super concentrated.
For best results, allow GP66 to sit for 2-3 minutes before wiping to let it fully penetrate the stain or mess. Always spot test first and provide proper ventilation. Avoid contact with eyes, skin, and fabric.
Thanks to GP66, I can banish messes all over the home without having to manually scrub. This Best Bathtub Cleaner Without Scrubbing is amazingly effective at cutting through grease, grime, stains, and more on virtually any surface. Just spray, let sit briefly, and wipe away. The power is in the formula doing the tough cleaning work, not your arm power!
How to Clean a Bathtub Without Scrubbing?
If you’re like me, scrubbing the bathtub is one of your least favorite cleaning tasks. I totally get it – it’s time consuming, makes your knees ache, and often seems to do more harm than good by scratching up the finish. But having a clean, hygienic bathtub is important, so what’s the solution?
Well, today I’m going to share my best tips and tricks for how to clean a bathtub thoroughly without all the tedious scrubbing. I’ve tried a ton of different methods over the years and finally found a routine that works amazingly well. The secret is using the right cleaning solutions and tools so you don’t have to manually scrub away for hours.
Now I’m able to deep clean the tub in a fraction of the time and with much less effort. Let me walk you through the whole process step-by-step. I promise you’ll never have to scrub a bathtub again after trying these techniques!
Supplies You’ll Need
First things first, let’s talk about what cleaning supplies you’ll want to have on hand. Having the right tools and solutions makes this so much easier. Here’s an overview of what I use:
- Baking soda – This mild abrasive helps lift away stains and buildup without damaging the tub surface. Make a paste with water to scrub lightly.
- Vinegar – Helps dissolve soap scum, hard water stains, and mineral deposits. Also removes musty odors.
- Liquid dish soap – Cuts through dirt, oil, and greasy grime that collects in the tub basin.
- Hydrogen peroxide – Disinfects and whitens without harsh bleach fumes.
- Tub & tile cleaner – Clinging foams designed to penetrate and lift soap scum and grime.
- Spray bottles – For applying cleaning solutions to surfaces. Avoid messy pouring.
- Microfiber cloths – Lint-free and won’t scratch like paper towels. Rinse frequently.
- Grout brush – Reaches into textured tile grout lines. Use gently.
- Old toothbrush – For scrubbing crevices around faucets and fixtures.
- Squeegee – Helps remove excess water so surfaces dry faster.
OK, with the right gear in hand, let’s get to the nitty gritty of how to actually clean your tub.
Here’s the full process I follow that allows me to completely clean the bathtub without endless scrubbing:
Remove Visible Dirt and Debris
First, start by giving the tub a thorough rinse to wash away any visible dirt, hair, soap scum or grime. Make sure to remove any large debris so it doesn’t clog the drain. I always keep a drain catcher in too so nothing gets washed down.
Apply Cleaning Solutions
Next, spray your cleaning solutions directly onto surfaces and let them sit to penetrate:
- Coat tub walls with baking soda paste – let sit 5 minutes
- Fill tub floor with vinegar – let sit 10 minutes
- Spray dish soap on walls & fixtures – let sit 2 minutes
Lightly Scrub With Soft Tools
Here’s where the magic happens – lightly scrubbing with soft tools instead of manually scrubbing with a brush or sponge:
- Gently agitate grout lines with a grout brush
- Scrub around faucets/fixtures with an old toothbrush
- Wipe down surfaces with a microfiber cloth
You’re not actually removing anything, just helping the cleaning solutions penetrate and lift stains. Let the tools do the hard work, not your arms!
Now rinse everything thoroughly with hot water:
- Rinse walls and tub basin
- Use squeegee to direct water toward drain
- Change rinse water/rinse cloth frequently
You should see all those baked-on stains and soap scum rinse away without having to manually scrub them off. Satisfying!
Disinfect and Whiten
For added hygiene and brightness:
- Spray hydrogen peroxide solution
- Let dwell 2 minutes then rinse
Remove Water Stains
If you have any mineral-based water stains:
- Spray vinegar directly on stains
- Let sit 5 minutes to dissolve
- Rinse away
Prevent Mold and Mildew
To keep your tub clean longer:
- Allow tub to dry fully after use
- Spray with vinegar after showering
- Wash/replace shower curtain liner frequently
And that’s it – follow these steps and you’ll be able to get your bathtub sparkling clean without spending hours hunched over scrubbing away!
Why This Works So Well?
Now you might be wondering why this method works so well to clean the tub without requiring harsh scrubbing. Here are a few of the reasons:
- The cleaning solutions do most of the tough staining-removal work, not manual labor. They penetrate and dissolve soap scum, minerals, oils, etc.
- Letting solutions sit gives time to react with and lift stains so they can be rinsed off, instead of just diluting and spreading around dirt.
- Soft tools provide gentle agitation to help solutions penetrate but don’t scratch surfaces like scrub brushes.
- Rinsing frequently prevents dirt from resettling into clean surfaces before you’re done.
- Targeted use of disinfectants and whitening agents finish the cleaning process.
- Preventative steps like drying the tub and spraying with vinegar help maintain results between deep cleans.
So in a nutshell, it’s all about having the right solutions, letting them work, gently assisting with soft tools, thoroughly rinsing, and maintaining results between major cleaning sessions. Follow my tips and you’ll get a spotless tub without damaging your back from scrubbing!
Tips to Make Cleaning Easier
Over the years I’ve picked up a few extra tips and tricks to make cleaning the bathtub even easier:
- Wear gloves – this keeps hands clean and improves grip on tools.
- Go bottom to top – start cleaning at the bottom of walls and work up so dirt doesn’t redeposit.
- Use hot water – it improves cleaning power and makes rinsing more effective.
- Open a window – improve ventilation so you don’t breathe in fumes.
- Clean right after showering – surfaces are already wet so solutions spread easier.
- Repeat as needed – you may need to reapply cleaners to get off tough buildup.
- Dry with old towel – speeds drying so surfaces resist new dirt and water marks.
- Clean weekly – regular cleaning prevents major buildup that’s harder to remove.
- Re-caulk if needed – failing caulk allows dirt and moisture to accumulate.
Hopefully these extra tips will make the process smoother and cleaning more effective. The key is staying on top of it regularly so grime doesn’t have the chance to really bake on.
Frequently Asked Questions
Q: What makes a bathtub cleaner effective without scrubbing?
A: The best no-scrub bathtub cleaners contain strong active ingredients such as surfactants and solvents that can penetrate and dissolve soap scum, hard water stains, mildew, and grime. They cling to surfaces longer to let the formula work.
Q: Are scrub-free bathtub cleaners safe for all surfaces?
A: Check the product label, but most are safe for use on surfaces like enamel, ceramic, porcelain, fiberglass, chrome, and tile. Avoid using them on natural stone surfaces. Always spot-test first.
Q: How long should I let a no-scrub cleaner sit before wiping it away?
A: Depending on the formula, let it sit for 5-15 minutes. This allows time for the active ingredients to fully penetrate and dissolve the grime and buildup before wiping clean.
Q: Can I use a scrub-free cleaner on my shower doors and walls?
A: Yes, most foam and spray cleaners are suitable for use on glass shower doors, fiberglass surrounds, and tiled walls. The foam clings well to vertical surfaces.
Q: What natural ingredients work well in bathtub cleaners?
A: Plant-based ingredients like tea tree oil, eucalyptus oil, lemon oil, and vinegar can cut through grime. Baking soda also gently scrubs without harsh chemicals.
Q: How often should I use a scrub-free bathtub cleaner?
A: For best results, use your no-scrub cleaner 1-2 times per week to prevent buildup. For heavier grime, let the product sit longer before wiping.
Q: Do I need to rinse after using a tub cleaner spray?
A: Most can be wiped away with a damp cloth. But you may want to do a final rinse, especially if cleaning the tub or shower where residues could remain.
Q: Can I use a bath scrubber tool with no-scrub cleaners?
A: Yes, you can gently use a scrubber to aid removal after letting the cleaner sit. But harsh scrubbing should not be necessary.
Q: What precautions should I take with scrub-free cleaners?
A: Avoid contact with eyes, skin, and fabrics. Open windows for ventilation. Always spot test on an inconspicuous area first.
Amanda has been designing and installing bathtubs for over 15 years. She first got interested in the bathtub industry while working as an interior designer right after college. During her years as a designer, Amanda was frustrated by the lack of high-quality, unique bathtub options for her clients. This passion led her to start her own bathtub website in 2009.